The Chip Muzzle is an excellent point of origin dust collector for use with needle scalers when working in hard to get places such as bridge beams and around rivets. The Chip Muzzle is molded from durable fiberglass filled ABS plastic.

The Chip Muzzle can be trimmed for specific purposes. When working around asbestos coated pipes, it can be shaped into a concave shape or when working in corners it can be mitered for greater efficiency. When used with a standard industrial vacuum, it will collect up to 95% of the toxic dusts being removed. . It comes with all the necessary attachments including a 3/4″ step up hose for adapting to our standard 6′ x 1.25″ x 2″ hose.

The Chip Muzzle uses a side pickup to apply suction to the general area of the work surface and remove toxic dusts from the workplace. When connected to any standard 2 hp industrial vacuum, the Dust Muzzle can remove up to 95% of the pollutants at the point of origin.

All Dust Collection Products dust collectors will work efficiently with an industrial vacuum that has at least 90” of static lift, 100 CFM of airflow and replaceable filter bags. (Nacecare 570 vacuum)



A. Put the hose clamp (2) over the slotted end of the Chip Muzzle (1).

B. Slide the Chip Muzzle on to the needle scaler or chipping hammer (3) leaving the needles or chisel protruding the desired distance. Tighten the hose clamp until the Chip Muzzle is securely attached to the needle scaler.

C. Slide the 3/4″ vacuum hose (4) over the vacuum pickup (5) on the Chip Muzzle.

D. Insert the small end of the 3/4″ to 1 1/4 ” hose adapter (6) into the open end of the 3/4″ vacuum hose.

E. You can now put a tapered 1 1/4″ vacuum hose fitting into the large end of the adapter.

F. Use the releasable cable tie (supplied) to attach the vacuum hose to the handle of the tool or the
air supply hose.