Universal Dust Muzzle fits all 4-5″ Grinders
Flip up panel for grinding close to walls
Made from rugged polycarbonate
Installs in Minutes
Excellent for Wet-or Dry Grinding and Polishing
Durable and Transparent
The Dust Muzzle Convertible 5 can be used for flat grinding in the field as well as for zero tolerance grinding close to walls and baseboards. It can be used with diamond cup wheels as well as silica carbide wheels to remove toxic dusts from the workplace.
How the Dust Muzzle Convertible 5 works
The Dust Muzzle Convertible 5 has a patented, adjustable set of steel adapters that allow it to be attached to virtually 4″-5″ pneumatic or electric angle grinder with a bearing housing diameters between 1 5/8″ and 2″ in diameter. For grinders with bearing housings less than 1 5/8″, use the Original Dust Muzzle model 515.
Vertical adjustment of the grinding wheel is achieved through a set of springs in the steel adapters as well as a set of spacer washers that can be used to move the grinding wheel vertically on the arbor of the grinder. A set of brushes assures a secure interface with the work.
A section of the skirt of the Dust Muzzle Convertible 5 can be removed and stored on the side of the shroud so the operator can expose the grinding wheel for zero tolerance grinding close to a wall or bulkhead.
*Note: The Dust Muzzle Convertible 5 uses the Dust Muzzle Step-Down Hose to connect it to the standard 1.5″ industrial vacuum hoses.
**Note: Use the attached chart to check compatibility. If you don’t see your grinder, call for technical support at 877 223-2154.
The Dust Muzzle Convertible 5 is excellent for grinding fiberglass, concrete, wood, toxic paints, asbestos and epoxies. It can be used with sandpaper, diamond cup wheels, polishing pads, silica carbide discs and fiber backed discs.
Fits virtually all 4″-5″ electric & pneumatic right angle grinders
Excellent for diamond cup wheels and Zec™ silica carbide wheels
Up to 95% efficient when used with a industrial 2hp vacuum system
The Dust Muzzle Convertible 5 is excellent for grinding epoxy paint off walls and floors.
When grinding close to a wall, remove the front panel on the skirt, store it on the side of the Dust Muzzle Convertible 5 and attach the guide in its place.
The Dust Muzzle Convertible 5 installed on a DeWalt 4 1/2″ grinder for grinding in the field.
The Dust Muzzle Convertible 5 on a Black & Decker 5″ grinder, set up for grinding close to a wall.