The 8” Dust Muzzle DC is a hands-off dust collector that can be easily used for dustless cutting with hole saws and core bits and drill bits. . It comes in three sizes. The DM1DC is for small drill bits under 1”, the DM2DC will handle core bits up to 2.25” and the DM3DC will handle core bits up to 3.25”
The Dust Muzzle DC can be used on the floor, vertical walls or overhead. Attach the hose, turn on the vacuum and place the Dust Muzzle so it is centered over center point of the hole. If the surface of the work is relatively smooth, the Dust Muzzle DC will self adhere to the work. You are now ready to drill dustless.
The Dust Muzzle DC used on a wall.
Dust Muzzle DM1DC on a wall.
How the Dust Muzzle DC Works
The Dust Muzzle DC has an inner ring with small castellations around the perimeter. When vacuum is applied to the exhaust port, air is pulled through the castellations into the inner ring of the Dust Muzzle where it is then sent out the exhaust port and into the vacuum.
Because the inner ring is co-planar with the skirt of the Dust Muzzle DC, a strong suction is created within the Dust Muzzle DC that holds the Dust Muzzle up to the wall or ceiling where it is being used.
All Dust Collection Products dust collectors will work efficiently with an industrial vacuum that has at least 90” of static lift, 100 CFM of airflow and replaceable filter bags. (Nacecare 570 vacuum)