$39.95
(Part# SMEB)
The Saw Muzzle Type E was patented in 2002 and is made to work with the 10″-16″ electric cutoff saws. They are easily installed and extremely efficient when used with a 2hp industrial vacuum system. It is excellent for cutting all materials that make toxic dusts.
Fits Hitachi, Milwaukee, Bosch, Makita and DeWalt Cutoff Saws
Installs in Minutes
Up to 99% Efficient
The Saw Muzzle Type E is designed to work with the industrial grade 10″-16″ electric cutoff saws to collect point of origin dust created from cutting
concrete, fiberglass or any other materials that create toxic pollutants. It
is adaptable to most electric cutoff saws that have been designed around industrial grinders. Use the Saw Muzzle Type E Cross Reference to order the correct Saw Muzzle for your saw.
How the Saw Muzzle Type E works
The Saw Muzzle Type E is made from fiberglass filled ABS plastic. It is
durable and abrasion resistant. The Saw Muzzle Type E uses the centrifugal forces generated by the saw blade to direct the dust into the intake port of the Saw Muzzle. When the Saw Muzzle Type E is connected to an industrial grade 2hp vacuum system, it can remove up to 99% of the dusts created at the point of origin.
Most electric cutoff saws are built off a grinder body and use a similar
base plate. The Saw Muzzle Type E takes advantage of this common design to use a simple, versatile mounting bracket that fits almost all brands.
Note** If the operator is using a Partner electric cutoff saw, use the SMGPE Saw Muzzle that is found on the Saw Muzzle GP page.
Applications
The Saw Muzzle Type E is excellent for cutting cinder block, brick, stone
and composite materials. The Saw Muzzle Type is efficient when making a single pass cut of anywhere from 1″-5″ or multiple pass cuts. It is also
excellent for cutting large diameter plastic and fiberglass pipe and for
roofing applications.
OSHA 2017 Silica Dust Requirements specify a HEPA vacuum with a minimum of 175 CFM for blades 7″ in diameter and greater. For better efficiency with the Saw Muzzle Type E it is recommended to use a vacuum system with a minimum of 175 CFM.
220 CFM Vacuum System
Features
Fits most brands of 10″-16″ electric cutoff saws.
Excellent for cutting pipe, concrete and plastics
Up to 99% efficient when used with a 2hp industrial vacuum system
