Description
• The Most Affordable Dust Muzzle For Crack Chasing, Cutting and Tuck Pointing
• Converts Original Dust Muzzle into a Dustless Cutting and Tuck Pointing Tool
• Up to 99% Efficient When Used With an Industrial 2hp Vacuum
• Installs in Minutes
The original Dust Muzzle can be retro-fitted with a cover plate that adapts them to be a point of origin dust collector for crack chasing, cutting or tuck pointing with blades from 4″ -7″. This system requires an Original Dust Muzzle and the cover plate. The adapter plates come in two sizes, 5″ and 7″. The 5″ cover plate, CCCP5 is $9.95 and the 7″ cover plate, CCCP7 is $14.95.
How the Crack Chaser, Tuck Pointing and Cutting Adapter Plates work
The Crack Chaser, Tuck Pointing and Cutting Adapter Plate serves a dual purpose. It modifies the Dust Muzzle so it can be used on edge for cutting, crack chasing and tuck pointing and it also acts as a guide for a more accurate depth of cut. The operator has the option of adjusting the depth of cut by trimming the Dust Muzzle and cover plate to reveal the amount of blade necessary to expose the correct amount of blade needed for cutting or removing material.
The cover plates snap on to the Dust Muzzles and lock in the dust that would normally escape when using a blade or a wheel on its edge. The cover plates come with a flat side that will allow the operator to reveal between 1/2″-2″ of blade depending upon the size of the blade or wheel being used.
The operator may remove more of the cover plate for greater blade depth. He then removes a similar amount of the Dust Muzzle to match the dimensions of the cover plate. See the installation instructions for complete instructions.
*Note: Once a Dust Muzzle is modified to use the cover plate, it cannot be used for flat grinding again.
Applications
The Crack Chasing system is excellent for crack chasing concrete, cutting and tuck-pointing. It is also good for cutting fiberglass, plastics and other materials that create toxic dusts.
Features
Fits virtually all blades and wheels from 4″-7″
For tuck pointing, crack chasing and cutting
Up to 99% efficient when used with a 2hp industrial vacuum system
Photo Galery
The 5″ Dust Muzzle with cover plate on a Makita grinder
The 7″ Dust Muzzle with cover plate on a Milwaukee grinder
The Dust Muzzle with cover plate on a Makita grinder with a 4″ cutting blade
Cutting blade on a 7″ Milwaukee grinder
Crack chaser on a 7″ Milwaukee
The Dust Muzzle Crack Chaser on a 5″ DeWalt Grinder
The Dust Muzzle Crack Chaser on a 5″ Makita Grinder
The Dust Muzzle Crack Chaser on a 7″ Milwaukee Grinder
