The Saw Muzzle

The Saw Muzzle


(Part# SMS)

The Saw Muzzle was patented in 2000 and is made to work with the left bladed worm drive circular saws with blade diameters from 7″-8″. They are easily installed and very efficient when used with a 2hp industrial vacuum system. It is excellent for crack chasing, tuck pointing and cutting all materials that make toxic dusts.

Video Installation Instructions

SKU: N/A Category:


Fits Skil, Milwaukee, Bosch, Makita and Other Worm Drive Saws
Installs in Minutes
Crack Chasing • Tuck Pointing • Cutting
The Saw Muzzle is designed to work with the industrial grade worm drive
circular saws to collect point of origin dust created from cutting concrete,
fiberglass or any other materials that create toxic dusts. The Saw Muzzle
will also fit some of the left hand bladed side drive saws. Use the Saw
Muzzle Cross Reference to order the correct Saw Muzzle for your saw.

How the Dust Muzzle works
The Saw Muzzle is made from fiberglass filled ABS plastic. It is durable and abrasion resistant. The Saw Muzzle uses the centrifugal forces generated by the saw blade to direct the dust into the intake port of the Saw Muzzle. When the Saw Muzzle is connected to an industrial grade 2hp vacuum system, it can remove up to 99% of the dusts created at the point of origin.

The Saw Muzzle is excellent for cutting cinder block, brick, stone and
composite materials. When fitted with a tuck-pointing blade, it can be used for removing rotten concrete from brick grout joints. When used with a 1/4″ or a 3/8″ crack chasing blade, it is excellent for crack chasing on parking structures or other flat surfaces. When used with a saw blade, it is excellent for cutting fiberglass and concrete.

The Saw Muzzle also works well with the Blade Roller to make a stable
rolling platform for cutting and crack chasing.

OSHA 2017 Silica Dust Requirements specify a HEPA vacuum with 220 CFM for diamond blades 7″ in diameter.
To be compliant the contractor will a need vacuum with the following specs.
220 CFM Vacuum System

Fits worm drive and hypoid drive left bladed circular saws

Excellent for Tuck Pointing, Crack Chasing and Cutting

Works well with concrete, fiberglass and wood

Up to 99% efficient when used with a 2hp industrial vacuum system

Saw Muzzle Standup Rolling Cart System for Cutting and Scoring

Saw Muzzle Standup Rolling Cart System for 1/4″ Faux Grout Lines

Photo Gallery

The Saw Muzzle fits these left-bladed worm drive saws:

DeWalt Models 368 & 378

Skil Model 77 Saws

DeWalt 535

Milwaukee 6477 & 6577 worm drive saws

Bosch models 1677, 1677MDT, 1678 and CSW41

Makita 5477 Hypoid saw


Go to Top