(Part# D7Crack375)
Quality: A++ This wheel aggressively cuts a .375” “V” Groove for hogging out cracks in preparation for grouting. Use this wheel with the 7” Dust Muzzle and the crack chaser attachment for crack chasing and decorative concrete work.
-
Sale!
(Part# Zec7) Quality A++. This wheel aggressively removes paint, mastic, epoxy and other materials that would ordinarily load up a diamond cup wheel. Use this wheel with a 7” Dust Muzzle before the final roughing up of the concrete with a diamond cup wheel. -
Sale!
(Part# D7PGB250) Quality A++ This blade is designed to quickly remove the grout from expansion joints that are filled with any soft filler such as polyurethane or non-hardening epoxies. The .250" kerf removes a large amount of grout with minimal effort. When used with the Saw Muzzle and a rolling cart it makes a tedious job effortless. Available with diamond knock-out and 5/8" arbor hole. -
Sale!
(Part# D7Tuck) Quality: A++ This wheel has a solid .380” of diamond segment height and it cuts a groove .250” across. Use this wheel with the 7” Dust Muzzle and the crack chaser attachment for tuck pointing or decorative work. -
Sale!
(Part# D7S) Quality: A++ This wheel is for the one time project. The quality is A++ but there are only half as many diamond segments as the 7” double row wheel. Use this wheel with a 7” Dust Muzzle. -
Sale!
(Part# D7SBS) Quality: A++ This blade is for making deeper cuts in tile, stucco and cement. It will cut slightly slower and cooler than the turbo blades. It comes with a diamond knockout and it can be used with the Saw Muzzle and Blade Roller™ on a Skil™ saw for scoring and expansion joints or on it's edge with the 7” Dust Muzzle and the crack chaser attachment. -
Sale!
(Part# D7D) Quality: A++ This wheel is very aggressive. It may leave swirl marks if not used carefully. Use this wheel with a 7" Dust Muzzle. -
Sale!
(Part# D7T24) Quality: A++ This is the best buy in the 7” wheels. It will grind aggressively while leaving a minimum of swirl marks. The turbo arrangement of the segments creates a cyclonic action that works excellently with the side pickup of the Dust Muzzle. Use this wheel with a 7" Dust Muzzle. -
Sale!
(Part# D7T12) Quality: A++ This wheel works well with the Dust Muzzle but it has only half the segments of the 24 segment wheel which costs only $37.00 more. Use this wheel with a 7" Dust Muzzle. -
Sale!
(Part# D7SBT) Quality: A++ This blade is for making deeper cuts in tile, stucco and cement. It will cut slightly faster but hotter than the segmented blades. It comes with a diamond knockout and it can be used with the Saw Muzzle and Blade Roller™ on a Skil™ saw for scoring and expansion joints or on it's edge with the 7" Dust Muzzle and the crack chaser attachment. -
Sale!
(Part# D5D) Quality: A++ This wheel is very aggressive. It may leave swirl marks if not used carefully. Use this wheel with a 5" Dust Muzzle. -
Sale!
(Part# D4.5S) Quality: A++ This wheel is for the one time project. The quality is A++ but there are only half as many diamond segments as the 4" double row wheel. Use this wheel with a 5" Dust Muzzle. -
Sale!
(Part# Zec4.5) Quality A++. This wheel aggressively removes paint, mastic, epoxy and other materials that would ordinarily load up a diamond cup wheel. Use this wheel with a 5" Dust Muzzle before the final roughing up of the concrete with a diamond cup wheel. -
Out of stock
(Part# D4.5SBS) Quality: A++ This blade is for tile and stucco work. Use this wheel with the 5" Dust Muzzle and the crack chaser attachment. -
Sale!
(Part# D4.5Elec)
Quality A++ This blade is excellent for cutting cast iron bath tubs, stucco with wire mesh lath and fiberglass. Unlike blades designed for cutting only concrete and stone, the diamond is electroplated to the edge and sides of the blades for an aggressive, smooth cut.
-
Sale!
(Part# D4.5T) 4" Quality: A++ This is the best buy in the smaller wheels. It will grind aggressively while leaving a minimum of swirl marks. The turbo arrangement of the segments creates a cyclonic action that works excellently with the side pickup of the Dust Muzzle. Use this wheel with a 5" Dust Muzzle. -
(Part# 234AD)
All Dust Muzzles for 2-3" die grinders and all Chip Muzzles need two of the step-down hoses so they can be adapted to the standard 11/2" hose on all standard industrial vacuums. The 234AD is a 3/4" x 18" hose that connects directly to the 2" & 3" Dust Muzzles and all the Chip Muzzles. It comes with an end fitting that connects directly to our 54" x 1 1/4" step-down hose.
-
This hose upgrade will connect two 100 CFM vacuums with standard 1 1/2" hoses to create an OSHA compatible 200 CFM system for grinding with 7" blades and wheels. The system comes with a "Y" connector that combines the two hoses, 25' of 2" industrial grade hose and all the connectors and end fittings necessary to combine the suction and airflow of two smaller vacuums into one large system. The larger diameter 2" hose reduces internal friction in the hose and provides higher CFM at the hose end. This is especially important when making runs of 50 ft. or more. Longer lengths of hose are available upon request.MoreInfo
PLEASE CALL FOR AVAILABILITY AND TO PLACE THE ORDER. -
This hose upgrade will connect two 100 CFM vacuums with standard 1 1/2" hoses to create an OSHA compatible 200 CFM system for grinding with 7" blades and wheels. The system comes with a "Y" connector that combines the two hoses, 25' of 1 1/2" industrial grade hose and all the connectors and end fittings necessary to combine the suction and airflow of two smaller vacuums into one large system. Longer lengths of hose are available upon request.
PLEASE CALL FOR AVAILABILITY -
Sale!
(Part# D14SBS) Quality: A++ This excellent blade is for use with the gas-powered cut-off saws or the electric cut-off saws for making the deepest cuts in block or cement walls, pavers and slabs. It works well with the Saw Muzzle GP or the Saw Muzzle Type E. -
Sale!
(Part# D12SBS) Quality: A++ This excellent blade is for use with the gas-powered cut-off saws or the electric cut-off saws for making deep cuts in block or cement walls and slabs. It works well with the Saw Muzzle GP or the Saw Muzzle Type E.
-
(Part# Hose4) The Dust Muzzle has a 1.25” female exhaust port and accepts a 1.25” tapered male hose fitting. If you do not have a vacuum hose with this fitting, you will need our step-down hose. Our step-down hose is 4 1/2 feet of lightweight blow molded hose that has a 1.25” male fitting on one end and a 2.25” female fitting on the other end. It attaches directly to the male end of all American industrial shop vacuum hoses. It extends the hose that comes with your vacuum by 4 1/2 feet. The above photo shows a shortened version of our hose. The standard vacuum hose is on the left.
