(Part# DMUHD5, Part# DMUHD8)
• Made from Flexible 1/4" Thick Industrial Grade Vinyl
• Flip up panels for grinding close to the wall
• Fits for all 4-5" and 7-9" grinders
• Adjustable airflow
• Accepts both 1 1/4" and 1 1/2" hoses
The Dust Muzzle Ultra Heavy Duty comes in two sizes. The DMUHD5 fits all 4"-5" grinders and the DMUHD8 fits all 7"-8" grinders. When the Dust Muzzle Ultra Heavy Duty is connected to a 2hp industrial vacuum it is the most efficient and durable Dust Muzzle available for right angle grinders.
Installation Instructions
-
(Part# DMU5, Part# DMU8)
• The Most Affordable Universal Dust Muzzle
• DMU5 fits all 4"-5" Grinders
• DMU8 fits all 7"-9" Grinders
The Dust Muzzle Ultra comes in two sizes. The DMU5 fits all 4"-5" grinders and the DMU8 fits all 7"-8" grinders. When the Dust Muzzle Ultra is connected to a 2hp industrial vacuum it is the most efficient and durable Dust Muzzle available for right angle grinders.
Do not use a Dust Muzzle for 7-9" grinders with bearing housing diameters less than 2.25". Use the Original Dust Muzzle.
Video Installation Instructions
-
(Part# DMHDAS) • The Most Efficient Dust Free Solution for Hammer Drills • Fits most popular hammer drills • Easy to use and install • Two models fit all short and long bit hammer drills The Dust Muzzle HamD comes in two sizes, one for long bits and one for short bits. Each model comes with three adapter rings that allow it to fit these model hammer drills: Makita BHR202Z, Bosch RHH180, DeWalt, DCH253, Milwaukee 2605-20, Hilti TE4-A18 -
(Part# DMHDAL) • The Most Efficient Dust Free Solution for Hammer Drills • Fits most popular hammer drills • Easy to use and install • Two models fit all short and long bit hammer drills The Dust Muzzle HamD comes in two sizes, one for long bits and one for short bits. Each model comes with three adapter rings that allow it to fit these model hammer drills: Makita BHR202Z, Bosch RHH180, DeWalt, DCH253, Milwaukee 2605-20, Hilti TE4-A18 -
• Over 40 Models Fit ALL 2" - 8" Grinders & Sanders
• Fits 2-3" Die Grinders, Pneumatic RO/DA Sanders and Angle Grinders
• Convertible for Crack Chasing and Tuck Pointing
If you use only one type of grinder and do not need one of our universal systems, the original grinder-specific Dust Muzzle that we patented in 1991 is your most economical choice. This tried and proven design is now made from rugged polypropylene and is flexible down to -20 degrees.
Video Installation Instructions
-
(Part# DMULN) • The Most Vertical Flexibility for Flooring Contractors • For Use with Zec Silica Carbide Wheels and Diamond Cup Wheels • Over 2" of Vertical Flexibility The Dust Muzzle Leatherneck is an extremely durable, easy to install Dust Muzzle that is designed with the floor installer in mind. Because of it’s extreme vertical flexibility, it can accommodate 7" discs as thin as the 1/4" thick silica carbide Zec™ wheels or the very deep diamond cup wheels. It can also accommodate the 8" soft pad sanding discs and backup pads. The Dust Muzzle Ultra Leatherneck uses the same completely universal neck design as the high density polypropylene Dust Muzzle Ultra so the operator can attach it to any grinder with any depth of wheel. Its 1 1/2" exhaust port swivels over 180 degrees and makes the Leatherneck excellent for picking up the large debris created when grinding thin set, wood floors or heavy paints and glues.
Installation Instructions -
(Part# DMAC5) • Flip up Panel for Grinding Close to Walls • Universal Dust Muzzle fits Virtually All 4-5" Grinders • Made From Rugged Polycarbonate The Dust Muzzle Convertible 5 is a universal Dust Muzzle that can be used for flat grinding in the field as well as for zero tolerance grinding close to walls and baseboards. It can be used with diamond cup wheels as well as silica carbide wheels to remove toxic dusts from the workplace.
Installation Instructions -
(Part# JMSH5, Part# JMSH7, Part# JMSH8) • The Most Affordable Replacement Dust Muzzles ($22.95) • Universal Dust Muzzle for all 4"-5", 7" & 8" Sanders and Grinders • Includes the Dust Muzzle, Step-down Hose and Adapter Ring • Accommodates 4"-5" and 7" Crack Chasers and Tuck Pointers The Jaw Muzzle is a complete system that consists of a universal adapter ring, a universal Dust Muzzle and a step-down hose. The Jaw Muzzle comes in three sizes: 4"-5", 7" and 8". The Jaw Muzzle will fit any 4"-8" grinder. It is rugged, flexible down to -20 degrees and it has the most affordable replacement Dust Muzzles of any of our designs.
Video
-
(Part# DM1DC, Part# DM2DC, Part# DM3DC)
The Dust Muzzle DC is a modification of the Dust Muzzle that allows the operator to collect dust when using hole saws and core bits. It is available for 2" and 3" hole saws.
Video Installation Instructions