(Part# D7T12)
Quality: A++ This wheel works well with the Dust Muzzle but it has only half the segments of the 24 segment wheel which costs only $37.00 more. Use this wheel with a 7" Dust Muzzle.
-
(Part# D7S)
Quality: A++ This wheel is for the one time project. The quality is A++ but there are only half as many diamond segments as the 7” double row wheel. Use this wheel with a 7” Dust Muzzle.
-
(Part# BRS) The Blade Roller is an economically priced rolling cart that is compatible with the Saw Muzzle. It fits Bosch™, Skil™ and Makita™ worm drive, left bladed saws. It allows friction-less movement of the saw when cutting free hand or when used with a guide for making faux grout lines and saw cuts, or any other place where a straight line is required. The frictionless rubber wheels on the Blade Roller assure you that you will leave no scuff marks on your work. The axle bolts of the Blade Roller stand proud of the wheels and can be run against an angle bar, metal guide or a melamine fence for making perfectly straight cuts.
-
(Part# JMSH5, Part# JMSH7, Part# JMSH8) • The Most Affordable Replacement Dust Muzzles ($22.95) • Universal Dust Muzzle for all 4"-5", 7" & 8" Sanders and Grinders • Includes the Dust Muzzle, Step-down Hose and Adapter Ring • Accommodates 4"-5" and 7" Crack Chasers and Tuck Pointers The Jaw Muzzle is a complete system that consists of a universal adapter ring, a universal Dust Muzzle and a step-down hose. The Jaw Muzzle comes in three sizes: 4"-5", 7" and 8". The Jaw Muzzle will fit any 4"-8" grinder. It is rugged, flexible down to -20 degrees and it has the most affordable replacement Dust Muzzles of any of our designs.
Video
-
(Part# SMS)
The Saw Muzzle was patented in 2000 and is made to work with the left bladed worm drive circular saws with blade diameters from 7"-8". They are easily installed and very efficient when used with a 2hp industrial vacuum system. It is excellent for crack chasing, tuck pointing and cutting all materials that make toxic dusts.
Video Installation Instructions
-
(Part# D4.5Tuck)
Quality: A++ This wheel has a solid .380” of diamond segment height and it cuts a groove .250” across and .250” deeper than the 4” tuck pointing wheel. Use this wheel with the 5” Dust Muzzle and the crack chaser attachment for tuck pointing or decorative work.
-
(Part# D4.5Elec)
Quality A++ This blade is excellent for cutting cast iron bath tubs, stucco with wire mesh lath and fiberglass. Unlike blades designed for cutting only concrete and stone, the diamond is electroplated to the edge and sides of the blades for an aggressive, smooth cut.
-
The Chip Muzzle can be trimmed for specific purposes. When working around asbestos coated pipes, it can be shaped into a concave shape or when working in corners it can be mitered for greater efficiency. When used with a standard industrial vacuum, it will collect up to 95% of the toxic dusts being removed. It comes with all the necessary attachments including a 3/4" step up hose for adapting to our standard 4' x 1.25" hose. If you have a 1.5" (ID) vacuum hose, you will need to purchase our Dust Muzzle Step-Down Hose ($14.95)
Installation Instructions
-
(Part# D4.5S)
Quality: A++ This wheel is for the one time project. The quality is A++ but there are only half as many diamond segments as the 4" double row wheel. Use this wheel with a 5" Dust Muzzle.
-
(Part# DMULN) • The Most Vertical Flexibility for Flooring Contractors • For Use with Zec Silica Carbide Wheels and Diamond Cup Wheels • Over 2" of Vertical Flexibility The Dust Muzzle Leatherneck is an extremely durable, easy to install Dust Muzzle that is designed with the floor installer in mind. Because of it’s extreme vertical flexibility, it can accommodate 7" discs as thin as the 1/4" thick silica carbide Zec™ wheels or the very deep diamond cup wheels. It can also accommodate the 8" soft pad sanding discs and backup pads. The Dust Muzzle Ultra Leatherneck uses the same completely universal neck design as the high density polypropylene Dust Muzzle Ultra so the operator can attach it to any grinder with any depth of wheel. Its 1 1/2" exhaust port swivels over 180 degrees and makes the Leatherneck excellent for picking up the large debris created when grinding thin set, wood floors or heavy paints and glues.
Installation Instructions -
(Part# SMEB)
The Saw Muzzle Type E was patented in 2002 and is made to work with the 10"-16" electric cutoff saws. They are easily installed and extremely efficient when used with a 2hp industrial vacuum system. It is excellent for cutting all materials that make toxic dusts.
Installation Instructions
-
(Part# SMZ)
The Saw Muzzle™ Type Z is a complete universal dust collector designed to be mounted on all Sawzall™ type reciprocating saws including the Milwaukee Sawzall, DeWalt, Bosch, Makita and all other large reciprocating saws. All components needed to connect the Saw Muzzle to a 1 1/2"industrial vacuum hose are included with the system. The Saw Muzzle Type Z is easily installed and it offers an unobstructed view of the blade. The 3/4" vacuum hoses have a built in memory rod that allows the operator to place the hoses at the exact point of dust creation without obstructing the view of the blade.
Video Installation Instructions
-
(Part# DMHDAL) • The Most Efficient Dust Free Solution for Hammer Drills • Fits most popular hammer drills • Easy to use and install • Two models fit all short and long bit hammer drills The Dust Muzzle HamD comes in two sizes, one for long bits and one for short bits. Each model comes with three adapter rings that allow it to fit these model hammer drills: Makita BHR202Z, Bosch RHH180, DeWalt, DCH253, Milwaukee 2605-20, Hilti TE4-A18 -
(Part# D7SBT)
Quality: A++ This blade is for making deeper cuts in tile, stucco and cement. It will cut slightly faster but hotter than the segmented blades. It comes with a diamond knockout and it can be used with the Saw Muzzle and Blade Roller™ on a Skil™ saw for scoring and expansion joints or on it's edge with the 7" Dust Muzzle and the crack chaser attachment.
-
(Part# D7SBS)
Quality: A++ This blade is for making deeper cuts in tile, stucco and cement. It will cut slightly slower and cooler than the turbo blades. It comes with a diamond knockout and it can be used with the Saw Muzzle and Blade Roller™ on a Skil™ saw for scoring and expansion joints or on it's edge with the 7” Dust Muzzle and the crack chaser attachment.
-
(Part# D4.5SBS)
Quality: A++ This blade is for tile and stucco work. Use this wheel with the 5" Dust Muzzle and the crack chaser attachment.
-
(Part# DMHDAS) • The Most Efficient Dust Free Solution for Hammer Drills • Fits most popular hammer drills • Easy to use and install • Two models fit all short and long bit hammer drills The Dust Muzzle HamD comes in two sizes, one for long bits and one for short bits. Each model comes with three adapter rings that allow it to fit these model hammer drills: Makita BHR202Z, Bosch RHH180, DeWalt, DCH253, Milwaukee 2605-20, Hilti TE4-A18 -
(Part# DM1DC, Part# DM2DC, Part# DM3DC)
The Dust Muzzle DC is a modification of the Dust Muzzle that allows the operator to collect dust when using hole saws and core bits. It is available for 2" and 3" hole saws.
Video Installation Instructions
-
(Part# DMU5, Part# DMU8)
• The Most Affordable Universal Dust Muzzle
• DMU5 fits all 4"-5" Grinders
• DMU8 fits all 7"-9" Grinders
The Dust Muzzle Ultra comes in two sizes. The DMU5 fits all 4"-5" grinders and the DMU8 fits all 7"-8" grinders. When the Dust Muzzle Ultra is connected to a 2hp industrial vacuum it is the most efficient and durable Dust Muzzle available for right angle grinders.
Do not use a Dust Muzzle for 7-9" grinders with bearing housing diameters less than 2.25". Use the Original Dust Muzzle.
Video Installation Instructions
-
• Over 40 Models Fit ALL 2" - 8" Grinders & Sanders
• Fits 2-3" Die Grinders, Pneumatic RO/DA Sanders and Angle Grinders
• Convertible for Crack Chasing and Tuck Pointing
If you use only one type of grinder and do not need one of our universal systems, the original grinder-specific Dust Muzzle that we patented in 1991 is your most economical choice. This tried and proven design is now made from rugged polypropylene and is flexible down to -20 degrees.
Video Installation Instructions
-
(Part# CCCP5, Part# CCCP7)
• The Most Affordable Dust Muzzle For Crack Chasing, Cutting and Tuck Pointing
• Converts any 5" or 7" original Dust Muzzle into a dustless Crack Chasing, Cutting and Tuck Pointing tool
• Up to 99% Efficient When Used With an Industrial 2hp Vacuum
The Dust Muzzle DC is a modification of the Dust Muzzle that allows the operator to collect dust when using hole saws and core bits. It is available for 2" and 3" hole saws.
The original Dust Muzzle can be retro-fitted with a cover plate that adapts them to be a point of origin dust collector for crack chasing, cutting or tuck pointing with blades from 4" -7". This system requires an Original Dust Muzzle and the cover plate. The adapter plates come in two sizes, 5" and 7". The 5" cover plate, CCCP5 is $9.95 and the 7" cover plate, CCCP7 is $14.95.
Do not use the Dust Muzzle Ultra or Jaw Muzzle for crack chasing, cutting or tuck-pointing. Choose a 4-5" or 7" Dust Muzzle from the cross reference of Original Dust Muzzles.
Video Installation Instructions
-
(Part# Hose4)
The Dust Muzzle has a 1.25” female exhaust port and accepts a 1.25” tapered male hose fitting. If you do not have a vacuum hose with this fitting, you will need our step-down hose. Our step-down hose is 4 1/2 feet of lightweight blow molded hose that has a 1.25” male fitting on one end and a 2.25” female fitting on the other end. It attaches directly to the male end of all American industrial shop vacuum hoses. It extends the hose that comes with your vacuum by 4 1/2 feet.
The above photo shows a shortened version of our hose. The standard vacuum hose is on the left.
-
(Part# Zec7)
Quality A++. This wheel aggressively removes paint, mastic, epoxy and other materials that would ordinarily load up a diamond cup wheel. Use this wheel with a 7” Dust Muzzle before the final roughing up of the concrete with a diamond cup wheel.
-
(Part# 234AD)
All Dust Muzzles for 2-3" die grinders and all Chip Muzzles need two of the step-down hoses so they can be adapted to the standard 11/2" hose on all standard industrial vacuums. The 234AD is a 3/4" x 18" hose that connects directly to the 2" & 3" Dust Muzzles and all the Chip Muzzles. It comes with an end fitting that connects directly to our 54" x 1 1/4" step-down hose.
-
(Part# Zec4.5)
Quality A++. This wheel aggressively removes paint, mastic, epoxy and other materials that would ordinarily load up a diamond cup wheel. Use this wheel with a 5" Dust Muzzle before the final roughing up of the concrete with a diamond cup wheel.
-
-
